月海盆地线性构造展布及其成因分析     

李力  刘少峰  吴志远  韦蔚  焦中虎  奚晓旭 《地质通报》2012,31(6):943-953

综合多源遥感数据识别提取月球正面南北纬50°之间的线性构造,重点分析月岭和月溪的影像特征、分布规律和时空关系,结合月海沉降模型分析两者的成因机制,结合地形和重力场数据预测影响月岭类型的因素。研究表明,在质量瘤盆地,月岭和月溪存在明显的时空关系和构造成因联系,两者主要由月海沉降产生的局部应力引起,前月海时期盆地的均衡状态和月海充填的几何形状可能影响了月岭的分布类型。  相似文献   

On the origin of the galactic ridge recombination lines     

K. R. Anantharamaiah 《Journal of Astrophysics and Astronomy》1986,7(3):131-139

Radio recombination lines are known to be observable at positions along the galactic ridge which are free of discrete continuum sources. Based on the results of a recent survey of H272α lines it is shown that most of the observed galactic ridge recombination lines can be explained as emission from outer low-density envelopes of normal Hn regions. The distribution of low-density ionized gas and discrete HII regions as a function of the distance from the galactic centre is also derived.  相似文献   

黄河三角洲北部贝壳堤岛的近期演变   总被引：2，自引：0，他引：2  

杜廷芹  黄海军  王珍岩  刘艳霞 《海洋地质与第四纪地质》2009,(3)

通过不同年代地形图、卫星影像的对比及野外实地测量等,综合分析了黄河三角洲北部开敞型和潮沟型两类贝壳堤岛近50年来的数量和面积变化及其演化特征。结果表明,该区两类贝壳堤岛自20世纪50年代以来在自然和人为因素的共同作用下发生了明显的变化,但其演化特征因岛屿成因的类型差异而各不相同。目前,该区贝壳堤岛群逐渐萎缩,人类活动已成为影响三角洲北部两类贝壳堤岛发育演变的主导因素,特别是潮沟型贝壳堤岛,基本上结束了自然演化的历史,呈现出新的演化特征。  相似文献   

Unpairing metamorphic belts: P–T paths and a tectonic model for the Ryoke Belt, southwest Japan     

MICHAEL BROWN 《Journal of Metamorphic Geology》1998,16(1):3-22

Southwest Japan is divided into Outer and Inner Zones by the Median Tectonic Line (MTL), a major transcurrent fault. The Outer Zone is composed of the Sambagawa (high-pressure intermediate or high P/T type metamorphism), Chichibu and Shimanto Belts. In the Inner Zone, the Ryoke Belt (andalusite– sillimanite or low P/T type metamorphism) was developed mainly within a Jurassic accretionary complex. This spatial relationship between high P/T type and low P/T type metamorphic belts led Miyashiro to the idea that metamorphic belts were developed as ‘paired’ systems. Textural relationships and petrogenetically significant mineral assemblages in pelites from the Ryoke Belt imply peak P–T conditions of ≈5 kbar and up to 850 °C in migmatitic garnet–cordierite rocks from the highest-grade metamorphic zone. It is likely that the thermal anomaly responsible for metamorphism of the Ryoke Belt was related to a segment of the Farallon–Izanagi Ridge as it subducted under the eastern margin of the Asian continent during the Cretaceous. The sequence of mineral assemblages developed in pelites implies a metamorphic field gradient with shallow dP/dT slope, inferred to have been generated by a nested set of hairpin-like ‘clockwise’P–T paths. These P–T paths are characterized by limited prograde thickening, minor decompression at peak-T , and near-isobaric cooling, features that may be typical of P–T paths in low P/T type metamorphic belts caused by ridge subduction. A ridge subduction model for the Ryoke Belt implies that juxtaposition of the high-P/T metamorphic rocks of the Sambagawa Belt against it was a result of terrane amalgamation. Belt-parallel ductile stretching, recorded as syn-metamorphic, predominantly constrictional strain in both Ryoke and Sambagawa Belt rocks, and substantial sinistral displacement on the MTL are consistent with left-lateral oblique convergence. Diachroneity in fast cooling of the Ryoke Belt is implied by extant thermochronological data, and is inferred to relate to progressive SW to NE docking of the Sambagawa Belt. Thus, an alternative interpretation of ‘paired’ metamorphic belts in Japan is that they represent laterally contemporaneous terranes, rather than outboard and inboard components of a trench/arc ‘paired’ system. Amalgamation of laterally contemporaneous terranes during large translations of forearcs along continental margins may explain other examples of ‘paired’ metamorphic belts in the geological record.  相似文献   

基于共轭地表曲面的山脊线和山谷线提取方法的研究   总被引：3，自引：1，他引：2  

黄培之  陈凯辉  刘泽慧 《测绘科学》2004,29(5):25-27

从数字化地形资料中自动提取山脊线和山谷线的技术,在测绘、工程设计等方面有着重要的意义。本文对地形流水模拟法提取山脊线和山谷线的方法进行深入研究后,提出利用共轭地表曲面的概念实现自动提取算法山谷线和山脊线的方法,并设计出了基于共轭地表曲面的地形流水模拟法自动提取算法山谷线和山脊线的算法。文后通过实验验证了该方法的有效性,它所提取的山脊线和山谷线与实际地形相符合。  相似文献   

抗差岭型组合主成分估计及误差影响   总被引：4，自引：0，他引：4  

刘雁雨  隋立芬  刘青利 《测绘科学》2004,29(2):50-52

本文从有偏估计类中的岭型组合主成分估计出发 ,结合抗差估计理论 ,利用抗差M估计模型 ,提出了一种新的抗差有偏估计法———抗差岭型组合主成分估计。推导了平差参数的抗差岭型组合主成分估计解 ,以及平差参数的验后精度和误差影响函数。计算结果表明 ,抗差岭型组合主成分估计不但能克服法方程系数阵病态性的影响 ,而且能有效地抵制观测值中精差的异常干扰 ,使参数的解更为准确可靠  相似文献   

无震脊或海山链俯冲对超俯冲带处的地质效应   总被引：3，自引：1，他引：2  

鄢全树  石学法 《海洋学报》2014,36(5):107-123

全球海底分布着众多的无震脊或海山链,且在太平洋、印度洋及大西洋均存在靠近俯冲带的海岭。除小安德列斯弧外的巴拉克达脊和蒂勃朗脊起源自转换断层外,一般认为它们由与板块构造动力学迥异的地幔柱动力学所形成的。在板块汇聚边缘处,与扩张脊处所形成的正常洋壳一起,无震脊或海山链俯冲于陆缘弧或洋内弧之下,其对弧及弧后地区的地质效应(构造、地貌、地震以及岩浆作用等)有别于正常洋壳俯冲。无震脊或海山链的俯冲通常造成俯冲带地区的上驮板块的局部异常抬升、俯冲剥蚀作用效应的加强、海沟的向陆迁移以及地震强度的增加。同时,无震脊或海山链俯冲时,其携带的具富集地球化学特征的物质不仅影响着地幔地球化学,也对弧及弧后火山熔岩化学产生明显影响,并对超俯冲地区的热液矿床的形成产生重要影响。最后,本文指出了我国有关无震脊或海山链俯冲的可能的研究方向包括黄岩海山链俯冲对吕宋岛弧的可能影响、印度洋无震脊俯冲对青藏高原局部地区的影响,有我国学者参与的IODP344航次的研究对象——科科斯脊俯冲对哥斯达黎加地震成因的效应以及位于西太平洋地区靠近俯冲带的一些无震脊等。  相似文献   

Seismic geomorphology,architecture and genesis of Miocene shelf sand ridges in the Pearl River Mouth Basin,northern South China Sea     

《Marine and Petroleum Geology》2014

Multiple stages of large-scale shelf sand ridges, including the shoreface-attached and the offshore types, have developed in the Miocene successions on the mid-shelf region of the Pear River Mouth Basin, northern South China Sea. Utilizing a high-quality 3D seismic data set, accompanying 2D seismic profiles and well logs, the morphology, architecture and genesis of these shelf sand ridges have been systematically investigated in this study. The ridges are of very large scale, with the largest one having a maximum height of 64 m, a width of more than 20 km and a length of 37 km within the 3D survey area. Being mound-shaped, they also display obvious asymmetry character, with the ridge crest preferentially located on the SE side. Three main internal components, including the ridge front, central ridge and the ridge tail, have been recognized through careful anatomy analysis of the two most well-imaged ridges, each displaying distinct expressions on seismic amplitudes and geometries. In the plan view, most of the shelf sand ridges are generally NE–SW oriented and widening to the SW direction. Scouring features can also be clearly observed along the SW direction, including scour depressions and linear sandy remnants. On well logs, the shelf sand ridges are represented by an overall coarsening-upward pattern. Intervals with blocky sandstones are preferentially present on higher locations due to a differential winnowing process controlled by shelf topography.Plenty of evidence indicates that these ridges were primarily formed by the reworking of forced regressive or lowstand deltaic deposits under a persistent southwesterly flowing current during the subsequent transgression. This very current is a composite one, which is speculated to consist of winter oceanic current, SCSBK (South China Sea Branch of Kuroshio) intrusion onto the shelf and internal waves propagating from the Luzon Strait. Tidal currents might have contributed to the SE growth of the ridge. In response to the reglaciation of Antarctic ice-sheet and the closure of Pacific-Indian ocean seaway in the middle Miocene, the intensification of the North Pacific western boundary current was considered to have potential links to the initiation of the shelf sand ridges at ∼12 Ma. The development of shelf ridges was terminated and replaced by rapid deltaic progradation at ∼5.5 Ma.  相似文献   

东海陆架前缘斜坡(冲绳海槽西坡)北部的断块隆脊地貌   总被引：1，自引：0，他引：1  

范奉鑫  林美华  江荣华  王春兰 《中国海洋大学学报(自然科学版)》2000,30(1):173-176

东海陆架前缘斜坡(冲绳海槽西坡)北部的断块隆脊,是呈长条形的脊状台式隆起,位于29°30′N-31°10′N;128°00′E-128°20′E之间。其由NNE向链状排列的断块山地组成,且与NNE向的断裂构造相一致,其顶部水深约300m～400m左右。从实测单道地震剖面看,隆脊的东西两侧均有断层出现。隆脊西坡倾向陆架一侧,坡度大,有的地方坡度超过10°;而东侧坡度较缓,仅1°左右,缓倾至海槽西坡坡底,并以沟坎式与冲绳海槽槽底相连。冲绳海槽地区的构造运动,使隆脊地区受到断裂构造的作用。NNE向的大断裂使该隆脊位置的东西两侧断裂下降而中间抬起,加之下部岩浆上侵,显现出链式排列的断块山地,表现为一条长形的断块隆脊构造地貌体。推测该地貌体形成的时期较晚,它是与断层的发生同时期形成的。  相似文献   

SPOT影像光束法平差复共线性消除          下载免费PDF全文

岳庆兴  马福诚  邱振戈  张春玲 《海洋测绘》2008,28(2):17-20

CCD卫星影像空间后方交会时，存在系数矩阵列向量间的强相关的问题，用光束法平差同样存在这个问题，将光束法平差与线角元素分求法、广义岭估计、附有限制条件的平差结合，证实三种方法都可以克服平差时外元素和变率改正数震荡大的缺点，并且取得了合理的空间后方交会精度和地面点定位精度。  相似文献